Definition:

Water based, interior, Crack appearance.

Binder:

Vinil polymer.

Density:

1.01 + 0.02 g/ml.

Solid content:

11% + 2%.

Color:

Transparent.

CONSUMPTION:

It is 6-9 m2 /Lt in one layer depending on the surface to be applied. Controlling sample should be done to calculate certain consumption.

APPLICATION:

All the surfaces where Betek Crackle will be applied have to be smooth, consistent, dry and convenient to support the paint. The surface has absolutely to be filled with Betek Universal Paste. After rubbing down the filled surface the Betek Decorative Primer application has to be performed and the surface preparation process has to be finished. When Betek Decorative Primer will dry, the colored Betek VitaMaxx is applied with a thin piled roller. After the paint is dried the flanges of the surface where the application will be made, are wreathed with a masking tape of 0.5 cm. Betek Crackle   Liquid is applied on it with the thin piled roller and the masking tapes are unstitched. 4 hours after the Betek Creative Effect Paint the Betek VitaMaxx of chosen color is applied with a thin piled roller. In the applications, do not make too much sweeping and do not make modifications on the surface which started to crack. The sweeping made after the start of the cracking will cause the deformation of the figure which will be formed

DRYING TIME

(in 20°C, %65 HR): Drying time to touch: 30 minutes. Second layer application: 1 hour. Fully desiccation: 24 hours

Note:*

In other colors exterior of the Betek Creative Effect Catalogue, due to the application methods, there would be a different in color shade. In these cases, it is recommended to perform a sample work. * The application should be done in between +10°C and +35°C.

THINNING:

It is ready to use.

Packaging:

2.5lt

Storing:

It can be kept for 2 years at a cool place protected from frost.