Definition: |
It is the decorative interior water-based |
 |
Binder : |
Acrylic copolymer |
Density: |
1.02 + 0.02 g/ml. |
Color : |
Creative Effects can be selected from Catalogue. |
CONSUMPTION: |
It is 5-7 m2/Lt in first layer by depending on the surface smoothness and absorbency. It should be done controlled sample for certain consumption |
APPLICATION: |
All surfaces that Betek Nebula will be applied should be smooth, strong, dry, clean and in a condition that can carry paint. The surface should necessarily be pasted by Betek Universal Paste. After the pasted surface is sanded, surface preparation should be completed by being applied Betek Decorative Primer for smooth surface. According to desired design on the surface, the primer is applied by cross motions or roll.
1.Step: After surface preparation has been completed, Betek Nebula colored in desired color tone is applied without being thinned diagonally and in short cross brush impacts with 3 numbered Betek synthetic paint Brush to the floor whose 1st Surface preparations have been completed.
2. Step: It is provided to be spread of white granule in the surface with Betek Design apparatus after 5-10 min. from being completed of its 2nd layer application |
DRYING TIME |
(20°C, at % 65 HR): Upper part dry: approximately 4 hours. |
ATTENTION: |
* The surface shouldn’t be in very absorbent structure; otherwise, because of the differences in dry, design faults can occur. * Betek Nebula is applied, it cannot be overlapped by the color tone in Creative Effect Catalogue because of the reasons such as transparent structure, application thickness, application method, and floor color.* When Betek Nebula is applied, prime with pigment should be used because the paint in the base can be seen. *DON’T THIN* the application should be done between + 10°C and +35°C. |
THINNING: |
It is ready to use. Don’t Thin. |
Packaging: |
2.5lt |
Storing: |
It can be kept for 2 years at a cool place protected from frost. |
| |
Download |