FAWORI Optimum Plastic

• Plastic decorative interior wall paint.
• Acrylic copolymer

Definition:

Plastic, Matt, interior wall paint

Binder:

Acrylic copolymer

Density:

1.54 + 0.02 g/ml

Solid content:

60% + 2%

Usage field:

Can be used on the interior surfaces of the new concrete and ceilings or the surfaces painted previously and lost its original color.

Application:

Surface should be strong, dry, clean, and self supportable. Cement essence surfaces should be kept waiting for 28 days. During application process; the temperature of the surface should be between minimum +5°C and maximum +30°C +5°C. Application can be by brush, roller or spraying. Before application process, it is suggested to remove strong and weak plaster particles from the surface by a scraper. On extremely absorbent surfaces, application of lining is suggested.

Airless Spraying:

Pressure: 140 bar. Angle of nozzle: 50°, measure of nozzle (in inches): 0,019".

THINNING:

It is recommended to Thin by clean water at a rate of 10 - 15 % according to size.
Thinning according to size: Apply two coats with maximum thinning 20 % In case used brush or roller. Apply one coat with maximum thinning 15 % In case used spray.

DRYING DURATION:

Depending on air temperature and humidity. First drying: 1 – 2 hour. Second layer application: 2 hours. Final drying: 24 hours

CONSUMPTION:

12 – 18 m² / LT on one layer and that is according to the surface condition.

Packaging:

15lt, 10lt, 9lt, 2.5lt

Storing:

It can be kept for 2 years at a cool place protected from frost.