Betek Royal Satin

• It is the decorative interior water-based
• Acrylic based
• Giving satin appearance.

Definition:

It is the decorative interior water-based

Glossy:

decorative satin appearance

Binder:

Acrylic copolymer

Density:

1.02 + 0.02 g/ml.

Solid content:

46% + 2%.

Color:

Creative Effects can be selected from Catalogue.

Application Areas:

It is required pasted surface to be able to apply Betek Royal Satin. The covers on the surfaces that are with old paint, glass textile and wall paper have been done should be removed if possible, and it should be pasted with Betek Universal Paste.

Consumption:

It is 8-12 m2/Lt in first layer by depending on the surface that will be applied. It should be done controlled sample for certain consumption.

APPLICATION:

All surfaces that Betek Royal Satin will be applied should be smooth, strong, dry, clean and in a condition that can carry paint. The surface should necessarily be pasted by Betek Universal Paste. The surface preparation process should completed by applying Betek Decorative Primer after the pasted surface is sanded. Betek Royal Satin that has been colored in selected color is applied to the surface with short hairy roll and it is left for dry. After the first layer paint has been dried, Betek Royal Satin Creative Effected paint colored is started to be applied to the surface with short hairy roll and while it is stil wet, it is desgined with Betek Royal Satin design roll.

DRYING TIME:

(20°C, at % 65 HR): Touch Drying: 30 minute Second layer application: 4-6 hours, perfect Dry: 24 hours.

Important Detail:

It can be difference in color tone because of the application methods in the colors requested except Creative Effects Catalogue. It is suggested to be done sample applications in these cases. The application should be done between +10°C and +35°C.

Diluting:

It is ready for use. Don’t Thin.

Packaging:

2, 5 Liter.

Storing:

It can be stored 2 years in the package not opened by being protected from freeze in a cool environment.